 Send
this image as an E-Postcard to a friend. Click
HERE  |
|
|
| Picture
Title: |
Welding bolster plates on |
| Location: |
|
| Photographer: |
Tom Downing |
| Submission
Date: |
3/6/2025 2:00:38 PM |
| Comments: |
The bolster pads were 1/16” wall 1x2 tub the 1/16 wall was too thin and would bend when riders stood on the side of the car when getting off and on. That would make the car very tippy so I made some 1/8 steel plates and welded them on. A few run days of use has past and the car seems to be doing fine now. |
| Gallery Category: |
Rolling Stock |
| Technical
Information: |
| Shooting Location: |
|
| Owner: |
SCLS |
| Locomotive Name or Road: |
|
| Locomotive or Car Type: |
|
| Whyte Classification |
Numeric: Name: Layout: Class: |
| Track Gauge: |
7.5 |
| Scale: |
|
|
|
S.C.L.S Facebook Page
Gallery Photos